www.astrosatellite.com SPLITTERS Astro Satellite

Home » SPLITTERS

 Checkout

Amplified 4-Way Splitter Kit

Details 

This amplified splitter is optimized for use with all satellite radio systems. It includes the adapters and accessories to permit operation of multiple satellite radios from a single antenna. In order to maintain the proper RF link budget for the radio, the splitter loss at 2.35 GHz has been compensated by an internal amplifier. This amplifier is powered by the DC voltage that is supplied by any of the radios connected to its output. The splitter will pass the DC voltage supplied by a radio at any output port to the splitter input port. This will provide power to any antenna connected to this port for the antenna’s internal low-noise amplifier (LNA). Standard RG-6 cable with male F-connectors (not included) can be used to extend the output cable lengths. The splitter has 8 dB of excess gain to permit output extensions of up to 70 feet. This splitter has been designed with an output impedance that replicates that of a satellite radio antenna so the radio will operate in its normal mode without the need for external impedance terminating devices. Unused output ports do not have to be terminated for proper operation.
Price: Quote it!
Add to cart

DirecTV Moca SWM Splitters

Details 

Designed to Work Specifically in DIRECTV™, MoCA Enabled, Commercial MDU Environments The MSAT Splitter Series was specifically designed to work in conjunction with DIRECTV’s™ single wire multiswitch technology (SWM) within Commercial MDU applications. Holland Electronics worked closely with DIRECTV™ and the MoCA Alliance to develop a splitter with on-board MoCA capabilities. Used after a standard SWM module, or after DIRECTV’s™ new SWM-integrated dish, the MSAT Splitter Series allows you to split the outputs from these devices to provide signal to up to 8 satellite receivers. With sealed F-ports, performance-tested plating and rugged cases, the MSAT Splitter Series can be used indoors as well as in harsh outdoor environments
Price: Quote it!
Add to cart

DSU Series 1GHz 80dB Emi MATV Power Passing Splitters

Details 

Broadband 5~1000MHz frequency range • High-performance printed board circuitry provides improved hum modulation and intermodulation parameters to ensure superior signal quality (DSU-P Series) • Yellow-chromate plated zinc-alloy diecast housing ensures excellent ground bonding and long corrosion-free service life in indoor/outdoor applications • Epoxy-sealed back cover provides effective EMI-RFI shielding >-80dB, eliminating signal ingress to provide distortion-free pictures • 1-inch centered 3⁄8˝ long precision machined F-connector threads ensure improved port-to-connector interface and accommodate external security devices • High retention seizing pins provide improved connectivity to connector center lead
Price: Quote it!
Add to cart

HFS Series 2150MHz 90dB Emi Satellite Splitters

Details 

High-frequency range 900~2150MHz L-Band suitable for analog and digital satellite applications • HFS series provide DC power passage to one port while blocking DC power to all other ports for improved hum modulation and Intermodulation performance. HFS-P series provide DC power passage to all ports for remote LNB-powering applications and powering the antenna preamplifier directly from the headend • High-performance printed board circuitry provides improved hum modulation and intermodulation parameters to ensure superior signal quality • Yellow-chromate plated zinc-alloy diecast housing ensures excellent ground bonding and long corrosion-free service life in indoor/outdoor applications • Epoxy-sealed back cover provides effective EMI-RFI shielding >-70dB, eliminating signal ingress to provide distortion-free pictures • 1-inch centered 3⁄8˝ long precision machined F-connector threads ensure improved port-to-connector interface and accommodate external security devices
Price: Quote it!
Add to cart

HFS Series Broadband Splitters

Details 

The HFS Series broadband splitters are an advanced design providing the lowest insertion loss from 5-2150 MHz while maintaining high isolation. The HFS-2/HFS-4 are power passing to one port, and the HFS-2P/HFS-4P pass power to all ports.
Price: Quote it!
Add to cart

HFSD Series Broadband Splitters

Details 

Holland Electronics HFSD series high frequency splitters have been designed for residential and commercial applications. The diode protected circuitry allows the DC power to pass from any output port to the input port and prevents DC back feeding.
Price: Quote it!
Add to cart

HR S Series Satellite Splitters

Details 

Our HR S Series diode steered splitters offer 130 RFI shielding. Features include solder back housing and our patented round-pin design for improved connectivity.
Price: Quote it!
Add to cart

TMP-S Series 1GHz Hardline Digital Splitters

Details 

5MHz to 1GHz Bandwidth performance • Bi-directional power rating to 15 amps @ 30, 60 and 90Vac provide compatibilty with most systems • Housing top stainless steel mounting hardware for easy installation • Epoxy coated aluminum alloy housing with tongue in groove interface provides 100dB effective EMI/RFI shielding reducing ingress/egress signals • Extended connector collars provide shoulder for good heat shrink bonding, eiliminating connector water migration extending life of housing • Rotating internal seizing pins provide installation flexibility allowing installation options • Performance tests conducted comforming with SCTE standards IPS TP-201, 202 and 203
Price: Quote it!
Add to cart

TSB-G Series 1GHz 130dB Emi Digital CATV Splitters

Details 

Digital-ready broadband 5~1000MHz frequency range • Solder-back cover-plate provides maximum EMI-RFI shielding >-130dB, eliminating signal ingress to guarantee distortion-free pictures • High-performance printed board circuitry provides low intermodulation distortion >-100dB to ensure excellent digital performance • High isolation >-40dB at 5~45MHz sub-bands provides for high level upstream signals • TSB-G series features capacitor coupling circuitry at all ports for effective DC voltage blocking. TSB-GDC series provide DC power passage to one port while blocking DC power to all other ports, providing for remote powering applications and powering the antenna preamplifier directly from the headend • 1-inch centered 1⁄2˝ long precision machined F-connector threads ensure improved port-to-connector interface and accommodate external security devices • High retention seizing pins provide improved connectivity to connector center lead
Price: Quote it!
Add to cart

TSV Series 1GHz 130dB Emi CATV Vertical Splitters

Details 

Broadband 5~1000MHz frequency range • Vertical port design allows close mounting in lock boxes for easy access of cable connections • 1-inch centered 1⁄2˝ long precision machined F-connector threads ensure improved port-to-connector interface and accommodate external security devices • TSV-SB series feature a solder-sealed back cover plate, providing maximum EMI-RFI shielding >-130dB and eliminating signal ingress to guarantee distortion-free pictures • Silver-coated zinc-alloy diecast housing ensures excellent ground bonding and long corrosion-free service life in indoor/outdoor applications • Capacitor coupling circuitry at all ports provides effective DC voltage blocking • Hig-retention seizing pins provide improved connectivity to connector center lead
Price: Quote it!
Add to cart

Wide Band 4-Way Passive Splitter

Details 

As opposed to standard splitters, this signal splitter has been specially designed to pass with low-loss, signals from the bottom of the AM broadcast band (500 kHz) to beyond the top of the satellite radio band (2.4 GHz). With such a wide pass-band it is very useful for implementing whole-house and commercial RF distribution networks of signals used in all types of entertainment systems. This unit was also designed to pass DC power from any of its output ports to the input port via protection diodes that prevent DC feedback. It can be used to pass DC from any of its output ports to the input port via protection diodes that prevent DC feedback.
Price: Quote it!
Add to cart

WS3G Series 3GHz Diode Steered Digital Splitters

Details 

5MHz to 3GHz Wideband operation suitable for digital and analog applications. • Diode-steered provides circuitry protection while allowing DC power to pass from output ports to input port without DC backfeeding (all ports). • Flat frequency response for consistent system performance. • High-performance printed circuit board provides improved hum modulation and intermodulation performance to ensure superior picture quality. • Solder-back case provides -130dB RFI shielding. • Heavy-duty case and nickel plating ensure long-lasting performance in harsh environments. • Flat-end ports provide for superior cable-to-port interface for maximum signal transfer.
Price: Quote it!
Add to cart


οΏ½ 2010 Astro Satellite, Inc. All Rights Reserved.